• CTA ZX2 Intake Kit, prototype pics
  • Started by Chris@CTA Motorsports
CTA ZX2 Intake Kit, prototype pics
on: November 28, 2006, 07:19:52 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Hi all

After a long period of time, we have decided to make an attempt at a second generation ZX2 intake kit. Expected prices, however, will be higher at $199.00USD ($219.00CAD) due to the cost of inflation and the use of a silicone 90 degree elbow. Clearance to the underside of the hood will be a non issue with the use of the silicone elbow.

Here are some pics of the prototype intake pics, 6 wire MAF version shown with black elbow/coupling. Silicone colours will be black, blue and red.





  • roushzx2
  • Master ZX2ner
  • *****

    • 921


    • 0
    • February 25, 2010, 08:40:45 PM
    • scranton,pa
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #1 on: November 28, 2006, 07:36:20 PM
« Last Edit: November 28, 2006, 07:49:39 PM by roushzx2 »
Now thats nice. Considering that is about the best intake on the market for the ZX2 $200 isn't that bad. For some of you newer members CTA intakes 1st gen are ranked up there with the Roush Intake if not better. I can only imagine what the 2nd gen is capable of. Maybe a admin will get one and give you guys a review. But either way CTA Motorsports are a old company with in the ZX2 community. Very trust worthy


  • zx2ms
  • ZX2ner
  • *****

    • 672


    • 10000
    • April 18, 2019, 04:05:50 PM
    • Madison, WI
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #2 on: November 28, 2006, 07:46:51 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Could you possibly price it out with the 90 elbow from these guys... http://www.hosetechniques.com/ I buy all my hoses from them. I like them alot. If not is there a way I could just buy the intake tubing.


  • Ironmark
  • ZX2 Crazy!
  • *****

    • 1724


    • 0
    • December 03, 2018, 09:23:01 PM
    • Parksville, NY
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #3 on: November 28, 2006, 08:25:20 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
WOHO!!! CTA is BACK!!!!


god I wish I had the money for one! I am definately interested in getting one, just going to take some time to get money.
Now -- Iceman Intake, K&N Filter, Trubendz 2.25" Catback w/ Cat for resonator, Sprint Springs, B&M Short Shifter, 21mm EGT RSB, ES Shifter Bushing, MSD Coilpack, FR 9mm Wires, MX3 Strut Bar

Soon -- EGT Brakes, SS lines, ES kit, WW Kit


Re: CTA ZX2 Intake Kit, prototype pics
Reply #4 on: November 29, 2006, 04:13:48 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "zx2ms "
Could you possibly price it out with the 90 elbow from these guys... http://www.hosetechniques.com/ I buy all my hoses from them. I like them alot. If not is there a way I could just buy the intake tubing.

Problem is that we have dealt with these guys before, and the price of their parts once they arrive at our door (in Canada), is more expensive than through our local suppliers. Saying that, we are looking at the possibilities of selling the kits in pieces, customer then picks up their own accessories.


  • zx2ms
  • ZX2ner
  • *****

    • 672


    • 10000
    • April 18, 2019, 04:05:50 PM
    • Madison, WI
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #5 on: November 29, 2006, 08:27:20 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "Chris@CTA Motorsports "
Quote from: "zx2ms "
Could you possibly price it out with the 90 elbow from these guys... http://www.hosetechniques.com/ I buy all my hoses from them. I like them alot. If not is there a way I could just buy the intake tubing.

Problem is that we have dealt with these guys before, and the price of their parts once they arrive at our door (in Canada), is more expensive than through our local suppliers. Saying that, we are looking at the possibilities of selling the kits in pieces, customer then picks up their own accessories.

I was just curious. Thanks though,
Chris


  • Foos Fight
  • ZX2 Crazy!
  • *****

    • 1135


    • 0
    • January 06, 2013, 03:42:23 AM
    • Toledo, OH
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #6 on: November 29, 2006, 03:15:09 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Did you guys fix the issue of the support bracket at the MAF/Filter as well?  I know Chris and myself had to replace the bracket because it broke.

- Darron
WARNING!  I probably have no idea what I\'m saying, doing or thinking...you have been formally warned.
16.210 1/4 mile and now I have a brand new tranny!


Re: CTA ZX2 Intake Kit, prototype pics
Reply #7 on: November 29, 2006, 04:12:12 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I've replaced my engine breather with its own after market filter. Can you guys make an intake that doesn't have the nozzel for it? I want to keep things clean as possible.
Never underestimate a good driver, and a determined little 4 banger.


  • NLcrew361
  • Newbie
  • *

    • 11


    • 0
    • April 28, 2007, 04:06:43 PM
    • CorpusChristi TX
  • more
Re: CTA ZX2 Intake Kit, prototype pics
Reply #8 on: November 29, 2006, 09:51:19 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
when will this intake be ready more or less been trying to get my hands on the first since it came out. so for sure im picking this up


Re: CTA ZX2 Intake Kit, prototype pics
Reply #9 on: December 01, 2006, 04:17:18 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "Foos Fight "
Did you guys fix the issue of the support bracket at the MAF/Filter as well?  I know Chris and myself had to replace the bracket because it broke.

- Darron


As per the pictures, there is a steel universal bracket now, no more aluminum, a lot stronger too.


Re: CTA ZX2 Intake Kit, prototype pics
Reply #10 on: December 01, 2006, 04:18:14 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "Darth Maverick "
I've replaced my engine breather with its own after market filter. Can you guys make an intake that doesn't have the nozzel for it? I want to keep things clean as possible.

We are looking at selling partial kits, or just the parts themselves. As well, we are reading the feedback about the breather line, and it looks like we can make it optional.


Re: CTA ZX2 Intake Kit, prototype pics
Reply #11 on: December 01, 2006, 04:19:10 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "NLcrew361 "
when will this intake be ready more or less been trying to get my hands on the first since it came out. so for sure im picking this up

Still waiting on some parts we need for production, so we may get these started before Christmas.


Re: CTA ZX2 Intake Kit, prototype pics
Reply #12 on: December 09, 2006, 08:06:11 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I'm assuming that these will be for the 00+ ones, because I don't see the extra hole thing for the 98-99s.


Re: CTA ZX2 Intake Kit, prototype pics
Reply #13 on: December 09, 2006, 04:56:34 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
You could always get an aftermarket engine breather, attach that, then use one of the current ports for that other one. Hell, I have a blue one I can send you.
Never underestimate a good driver, and a determined little 4 banger.


Re: CTA ZX2 Intake Kit, prototype pics
Reply #14 on: December 12, 2006, 04:09:18 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "Millefune "
I'm assuming that these will be for the 00+ ones, because I don't see the extra hole thing for the 98-99s.
I'm pretty sure I noted that the 6 wire version was shown in the pic, however, all years will be available.