• Stage 1 Comp Cams
  • Started by pissdrunx16
Stage 1 Comp Cams
on: September 11, 2009, 11:37:53 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I have a set of Stage 1 Comp Cams. The exhaust is not for our cars (ZX2). I Bought these cams with a ported head package I purchases from another member.  I have no need for these cams since I have a set of high torqe cams for my build. Cams are/look brand new NEVER ran. Comes with spec sheets and stickers for both cams. $200 OBO

Cam Specs:

Exhaust Cam:
      Adv. Dur:@ .006 272
      Dur @ .050: 228
      Valve LiftL .381
Intake Specs:
      Adv. Dur:@ .006 272
      Dur @ .050: 228
      Valve Lift: .381




MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


  • D_Jett87
  • Newbie
  • *

    • 30


    • 0
    • January 20, 2011, 07:08:04 PM
    • Kinston, NC
  • more
Re: Stage 1 Comp Cams
Reply #1 on: May 24, 2010, 07:01:34 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
hey i may be interested in the cams. how much change can i tell with them performance wise ?


Re: Stage 1 Comp Cams
Reply #2 on: May 25, 2010, 10:55:29 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I sold off the intake cam, all I have left is the exhaust cam and it will not fit in the ZX2 head only the focus head.  We can swap with focus intake cams, but we can't switch with focus exhaust cams because our heads are equipt with te VCT on the exhaust cams.
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


  • D_Jett87
  • Newbie
  • *

    • 30


    • 0
    • January 20, 2011, 07:08:04 PM
    • Kinston, NC
  • more
Re: Stage 1 Comp Cams
Reply #3 on: May 25, 2010, 03:25:32 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
So if i changed my head with a focus head will i have more performance or can i even do that. I trying to get as much performance to my engine as i can


Re: Stage 1 Comp Cams
Reply #4 on: May 25, 2010, 09:39:47 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
If you convert your head to a focus head you will have more performance options yes.  The head will bolt to our block but not all the sensors will plug right in.  The cam pos sensor is one of the sensors.  Since a fofo CPS is on the intake and ours is on the exhaust.
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood