• Superchip and ECU Combo 6 wire/mtx compatible
  • Started by pissdrunx16
Superchip and ECU Combo 6 wire/mtx compatible
on: October 30, 2009, 01:18:25 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I wouldve just updated my old superchip thread but I couldnt seem to find the edit button on my posts.... sooooo.................

Superchip and ECU for a 99.5+ ZX2, MTX, 6 Wires MAF. These superchips are good for bolt on tunes! I would recommend running at least plus fuel. bumps up the rev limiter and speed governor. This particular chip is for VWK0. Any questions NEWB or not feel free to ask I will get back to you ASAP.


(Not actual ECU this is just to give you an idea of what you would be getting.)
$125 without ECU
$160 with ECU
I take Paypal.
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


  • krux303
  • ZX2ner
  • *****

    • 548


    • 0
    • December 18, 2018, 03:27:28 PM
  • more
Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #1 on: October 31, 2009, 12:42:37 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
They make a noticeable difference guys. Bump for him
skate42112: a regular slap to the face is not manly but yet a backhand to the face shows great power


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #2 on: November 03, 2009, 10:57:51 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Bump

just sold the other one I had and the dude loves it! Don't let this one slip by!
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #3 on: November 29, 2009, 09:19:23 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Bump
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


  • KoiHoshi
  • ZX2 Crazy!
  • *****

    • 1391


    • 0
    • October 05, 2012, 11:15:16 AM
    • Oregon, USA
  • more
Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #4 on: November 30, 2009, 10:13:17 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Damn my 4 wire MAF.
Manda stole my ZX2.


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #5 on: November 30, 2009, 11:13:54 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
I could always try and get a 4 wire chip for you :)
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


  • KoiHoshi
  • ZX2 Crazy!
  • *****

    • 1391


    • 0
    • October 05, 2012, 11:15:16 AM
    • Oregon, USA
  • more
Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #6 on: November 30, 2009, 03:30:55 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Lol no its ok.  Amanda mostly drives it.  She doesn't need an sr tune *shhhhh*
Manda stole my ZX2.


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #7 on: December 02, 2009, 02:24:05 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
shipped to oceanside, CA?


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #8 on: December 02, 2009, 04:02:14 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
The price listed is the price shipped....
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #9 on: December 02, 2009, 04:32:36 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
i'll take it


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #10 on: December 02, 2009, 05:12:01 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Right on my paypal is jessikayounce@yahoo.com you can send it as a gift so paypal dosent take the 3% or you can add the 3% to the cost. PM me when you send the payment with your add you want it sent to. any other questions feel free to ask.
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #11 on: December 02, 2009, 05:13:57 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Quote from: "KoiHoshi"
Lol no its ok.  Amanda mostly drives it.  She doesn't need an sr tune *shhhhh*

I dont know how this slipped by me.....
Amanda tell derik you wantz a tune LOL
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #12 on: December 02, 2009, 06:16:00 PM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
SOLD..... I may try and get a couple more to sell... gimme a little bit of time... or if your interested let me know and Ill get on the ball LOL
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #13 on: April 15, 2010, 09:10:12 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
It is official I have received the chips today I have like 18 or so chips and like 7 flip chips. I can probably do other ford makes that accept the 1100 chips if you want to chip your F150 or Crown Vic.  The ZX2 ECU codes are still listed on PG. 1 if you don't see your ECU code give it to me and I can check if it is available (same goes for other makes.)
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood


Re: Superchip and ECU Combo 6 wire/mtx compatible
Reply #14 on: April 15, 2010, 10:11:51 AM
« Last Edit: December 31, 1969, 04:00:00 PM by Guest »
Since I cant update post # 1. (I dunno why? after a certain about of time are you unable to edit a post?) here is a list of pricing info and ECU codes. VVVVVVV

I figured I would help out the community a little bit by spreading around some MOAR POWER hahaha;)

Superchip and ECU for a 99.5+ ZX2, MTX, 6 Wires MAF. These superchips are good for bolt on tunes! I would recommend running at least plus fuel. bumps up the rev limiter and speed governor.  Any questions NEWB or not feel free to ask I will get back to you ASAP.

$125 without ECU
$160 with ECU (none currently avalable)
I take Paypal.


(not actual ECU this is just to give you a idea.)
I know they have tunes for:
LXQ1
HSB0
GRS0
LXQ2
VWK0
KVT8
CWQ3
CIL2
NXL0
ZDX0
They do NOT have:
DXL0
XHG3
Any other codes I will have to check.
I take paypal. Payment is required to get it flased.

Any Questions feel free to ask!
MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood