ZX2 Motorsports

ZX2 Dedicated Discussion => Projects and Worklogs => Topic started by: ZZZX2 on March 25, 2009, 01:20:18 PM

Title: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on March 25, 2009, 01:20:18 PM
As many of you know, the ZX2 has been off the road for some time.

This post is the account of why it’s off the road and what’s going on with it

I'll start out by showing the Car and engine bay before the project began.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg386%26%2346%3Bimageshack%26%2346%3Bus%2Fimg386%2F1651%2F1000359go6%26%2346%3Bjpg&hash=082f8b2dfd2754d8413e6ec4b303567a)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg113%26%2346%3Bimageshack%26%2346%3Bus%2Fimg113%2F449%2F0000276lo0%26%2346%3Bjpg&hash=ca62d4e2940c5c6cf66c432b9a888665)

The reason the project grew into something more than just an engine rebuild is the fact that Crys and I purchased a garage and the owners threw in a house lol.

Pic of the workspace from the previous owner

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg300%26%2346%3Bimageshack%26%2346%3Bus%2Fimg300%2F7590%2F2346691sc2%26%2346%3Bjpg&hash=68e24de2ea037963b69a8b9673ca076d)

Here is the engine that I picked up for the engine build
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg386%26%2346%3Bimageshack%26%2346%3Bus%2Fimg386%2F8792%2F1000406jp0%26%2346%3Bjpg&hash=bffc1d750fa197e16ca54110d19e9e8f)

After tearing it down...

Before some smart A** says something about parts being laid out on a 57 chev..... my buddy who owns the car put them there...  it's our next project a full fram off restoration.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg66%26%2346%3Bimageshack%26%2346%3Bus%2Fimg66%2F1152%2F1000425xm6%26%2346%3Bjpg&hash=8ffa04e397c83b9a3c1a7ebc689d1e18)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg338%26%2346%3Bimageshack%26%2346%3Bus%2Fimg338%2F5548%2F1000442yo4%26%2346%3Bjpg&hash=a76c11395cf170002f1cfb6bc4022b35)

Me hard at work
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg505%26%2346%3Bimageshack%26%2346%3Bus%2Fimg505%2F1496%2F1000586ri7%26%2346%3Bjpg&hash=2ae1f663895dd1979ad3b740c0615a52)

Block put back together after slight overbore and balancing.
Crower rods and JE pistons 9:1 CR

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg386%26%2346%3Bimageshack%26%2346%3Bus%2Fimg386%2F4452%2F1000602wn4%26%2346%3Bjpg&hash=106669574a959bc14045b254d7fc0967)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg372%26%2346%3Bimageshack%26%2346%3Bus%2Fimg372%2F5124%2F1000601ry7%26%2346%3Bjpg&hash=ab32f5c671a1b31bbe501e5d50dfadbb)

I decided that the old turbo setup needed to be changed... I just didn't like the way it looked and had too many issues with the manifold cracking.

So it's out with the old and in with the new

Pic of the old manifold

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg115%26%2346%3Bimageshack%26%2346%3Bus%2Fimg115%2F2403%2F1000651xp5%26%2346%3Bjpg&hash=48579ba1673d0e89f4d8622d596e0fa1)

Pics of the new manifold and downpipe

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg104%26%2346%3Bimageshack%26%2346%3Bus%2Fimg104%2F4610%2F1001115ue1%26%2346%3Bjpg&hash=e3a9d7a64943a777fd00b99ae3cff149)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg386%26%2346%3Bimageshack%26%2346%3Bus%2Fimg386%2F8228%2F1001121yy3%26%2346%3Bjpg&hash=de15b5eb71f5d7c320edb8046ffb5226)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg505%26%2346%3Bimageshack%26%2346%3Bus%2Fimg505%2F1663%2F1001120mk0%26%2346%3Bjpg&hash=ab0026e6133af961ca55f87e57e3a342)


The other reason that I decided to make this a full project doing the engine, exterior and interior is that I picked up a donor car from a member.

Several of the parts have come from the donor car, are new parts, or are parts purchased from TZX2 members.

Seats and interior are coming from the donor car

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg151%26%2346%3Bimageshack%26%2346%3Bus%2Fimg151%2F8396%2F1001022gu7%26%2346%3Bjpg&hash=4afde0d652b00c8bb9c746683826b55e)

Misc shots of parts laying around the garage now

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg150%26%2346%3Bimageshack%26%2346%3Bus%2Fimg150%2F716%2F1001019nx5%26%2346%3Bjpg&hash=c43fc1554292ba53de6f16c57997ede6)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg151%26%2346%3Bimageshack%26%2346%3Bus%2Fimg151%2F2103%2F1001018yh8%26%2346%3Bjpg&hash=70f0e86977404f0562e118a8f3df4920)

Valve cover coated by Skuce

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg395%26%2346%3Bimageshack%26%2346%3Bus%2Fimg395%2F7689%2Fdsc00332do0%26%2346%3Bjpg&hash=0a9dc001fe74b5e4bdebab65a97f5eb6)

New rotors I just got in the mail (since the rear disk swap)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg158%26%2346%3Bimageshack%26%2346%3Bus%2Fimg158%2F4222%2F1001160br2%26%2346%3Bjpg&hash=b1523e5c4d53fa05c7946c9da6444542)

The baby I waited a year for

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg374%26%2346%3Bimageshack%26%2346%3Bus%2Fimg374%2F2523%2Ffrim1ns9%26%2346%3Bjpg&hash=68363f2077cee8de7369bcaca97ea86a)

The modified mustang TB being used with the FRIM

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg204%26%2346%3Bimageshack%26%2346%3Bus%2Fimg204%2F8374%2F1001110ji6%26%2346%3Bjpg&hash=a7d8d7240bf4c156cfc667f6795b3a6e)

New front bumper with WW lip (not the color I'm going with) and I picked up the sides and rear in may so I now have a full WW kit for the car

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg338%26%2346%3Bimageshack%26%2346%3Bus%2Fimg338%2F8180%2F1000527jd5%26%2346%3Bjpg&hash=cc03ca60144947851054d87f276eaaf7)

Some of the other goodies

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg263%26%2346%3Bimageshack%26%2346%3Bus%2Fimg263%2F8816%2F1001157lb8%26%2346%3Bjpg&hash=95bc950a63ab4a6c8f35f28a70d1d5a9)

I couldn't pass up the deal on this so I bought it too

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg48%26%2346%3Bimageshack%26%2346%3Bus%2Fimg48%2F3403%2F1001155ev4%26%2346%3Bjpg&hash=5feee3669a6fdbc5bc54f3f7762e56e7)

not pictured is a set of Mazdaracer's lower tie bars.

a quick snapshot of the front end with the suspension almost done (minus new rotors)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg395%26%2346%3Bimageshack%26%2346%3Bus%2Fimg395%2F3955%2F1001159rp7%26%2346%3Bjpg&hash=b516cc033ec1177d57082b3f5c9c7730)

Engine bay.... something is missing.... lol
actually took the pic to show the manual rack installed.

also I have ES all the way around on this car

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg66%26%2346%3Bimageshack%26%2346%3Bus%2Fimg66%2F497%2F1001158bp9%26%2346%3Bjpg&hash=3ca3385b314b039186f8329eab05803f)

I know there isn't any chronological order to this thread.

There will be from now on.... I just had to redo it all so I kinda threw it all together.  But here we go.

Here is a pic of the suspension together with the SS brake lines, painted calipers and the coil overs on....  Now I have to take some of it apart again to install the lower tie bar for the front.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg395%26%2346%3Bimageshack%26%2346%3Bus%2Fimg395%2F3955%2F1001159rp7%26%2346%3Bjpg&hash=b516cc033ec1177d57082b3f5c9c7730)

pic of the rear disk conversion with the painted calipers.... yeah it'll look a ton better with those new rotors.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg408%26%2346%3Bimageshack%26%2346%3Bus%2Fimg408%2F9360%2F1001063di8%26%2346%3Bjpg&hash=88562cb960a385494bea7234a08d8b7d)

Pic of the manual rack next to the power steering rack

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg104%26%2346%3Bimageshack%26%2346%3Bus%2Fimg104%2F9730%2F1001057en5%26%2346%3Bjpg&hash=060519ddfd8f5c3114ae012fdd6842d5)

I coated the whole underside of the vehicle with truck bed liner (here is the rear cross member)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg66%26%2346%3Bimageshack%26%2346%3Bus%2Fimg66%2F6973%2F1001015vt8%26%2346%3Bjpg&hash=affbc939608aa72889f1506d72e62dc8)

Look ma, no Ford symbol!!!

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg402%26%2346%3Bimageshack%26%2346%3Bus%2Fimg402%2F9392%2F1000530fl4%26%2346%3Bjpg&hash=9d584e7dccf9e41b7202378a49f6e85d)

Random pic that has nothing to do with the build.... well she is the woman that is putting up with this project so I think she deserves some recognition.

P.S. she hates this pic and would kill me if she knew I posted it.  lol

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg129%26%2346%3Bimageshack%26%2346%3Bus%2Fimg129%2F5931%2F1000246rt5%26%2346%3Bjpg&hash=fcf092d40eeb426785d7d4d295fe8bcb)

That's it for now...

I left out a bunch of the pictures from the actual build... I figured I wouldn't bore you all with pics of me tearing down the motor.. or installing rings on the pistons.

Sorry about the poor quality of the images,

I ripped apart 2 transmissions so that I could keep the guts of the one and put the LSD in the other.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg238%26%2346%3Bimageshack%26%2346%3Bus%2Fimg238%2F9407%2Fp00060oa4%26%2346%3Bjpg&hash=6fd36e235ab2dcb59e4b571913a13b12)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg123%26%2346%3Bimageshack%26%2346%3Bus%2Fimg123%2F6951%2Fp00061dl7%26%2346%3Bjpg&hash=67404f14272f92abbce5f73b8e8c4760)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg48%26%2346%3Bimageshack%26%2346%3Bus%2Fimg48%2F9021%2Fp00062pc4%26%2346%3Bjpg&hash=c81e300b60e23b11d1425b0d40d91099)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg106%26%2346%3Bimageshack%26%2346%3Bus%2Fimg106%2F5796%2Fp00063cl4%26%2346%3Bjpg&hash=3728508a67e43f261fae67e238b4505f)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg48%26%2346%3Bimageshack%26%2346%3Bus%2Fimg48%2F8307%2Fp00064rz6%26%2346%3Bjpg&hash=ccf93b68b97cfd96cce7b93723866fa2)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg110%26%2346%3Bimageshack%26%2346%3Bus%2Fimg110%2F300%2Fp00066yl7%26%2346%3Bjpg&hash=8dd6a284e25e8bf9acd1b0c10b016137)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg119%26%2346%3Bimageshack%26%2346%3Bus%2Fimg119%2F2953%2Fp00067tx6%26%2346%3Bjpg&hash=39fa8aea486d5ff967fd1d3f6de4dea5)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg50%26%2346%3Bimageshack%26%2346%3Bus%2Fimg50%2F9731%2Fp00068ub2%26%2346%3Bjpg&hash=67dc1d807ba9c84016322906a06bb7dc)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg161%26%2346%3Bimageshack%26%2346%3Bus%2Fimg161%2F4698%2Fp00069xy3%26%2346%3Bjpg&hash=ef199b3a15c9c37051a98d6189d81701)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg102%26%2346%3Bimageshack%26%2346%3Bus%2Fimg102%2F1200%2Fp00070hv6%26%2346%3Bjpg&hash=1d37aa6d4c39341e627d7ab8d215ec02)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg518%26%2346%3Bimageshack%26%2346%3Bus%2Fimg518%2F9730%2Fp00071gz1%26%2346%3Bjpg&hash=f731903aac3c3f35c05cb156039277ab)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg239%26%2346%3Bimageshack%26%2346%3Bus%2Fimg239%2F2913%2Fp00072wt1%26%2346%3Bjpg&hash=4c9936c4639bd487ae7d397b079cfc85)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg108%26%2346%3Bimageshack%26%2346%3Bus%2Fimg108%2F6385%2Fp00073uv1%26%2346%3Bjpg&hash=78f8b4d89009b637d029abc9c6b4b5fb)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg125%26%2346%3Bimageshack%26%2346%3Bus%2Fimg125%2F2272%2Fp00074dw0%26%2346%3Bjpg&hash=dd0fdb2d1b470b5310881a7e78b59a57)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg162%26%2346%3Bimageshack%26%2346%3Bus%2Fimg162%2F7720%2Fp00075rm7%26%2346%3Bjpg&hash=5f5dc07a35875f9a8d033e706611772d)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg240%26%2346%3Bimageshack%26%2346%3Bus%2Fimg240%2F6143%2Fp00076xv1%26%2346%3Bjpg&hash=67b68a0bb92a0b2ca62313fc471f5932)(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg119%26%2346%3Bimageshack%26%2346%3Bus%2Fimg119%2F3312%2Fp00077nr9%26%2346%3Bjpg&hash=97c3101446b90b27cb464d5d02234e87)


I didn't take any pics beyond here cause it's pretty straight forward and I didn't need any reference pictures for myself.

far from finished.  The last pic is my tranny with the MSP LSD installed and put together.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg518%26%2346%3Bimageshack%26%2346%3Bus%2Fimg518%2F7826%2F1001173rz0%26%2346%3Bjpg&hash=8465c326381f04c6c0887e26da8eb085)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F5595%2F1001172ao0%26%2346%3Bjpg&hash=49e5b876ff09bbc464a1c0d99a7e1365)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg339%26%2346%3Bimageshack%26%2346%3Bus%2Fimg339%2F5766%2F1001174uo8%26%2346%3Bjpg&hash=e4b4eda07ee8e1e4e9c1afa510e8ff80)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg124%26%2346%3Bimageshack%26%2346%3Bus%2Fimg124%2F6450%2F1001175sz9%26%2346%3Bjpg&hash=8c2043e45912521051bf02b548dc55ca)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F9529%2F1001176xi2%26%2346%3Bjpg&hash=d60c4764ac9d9e3c6cdc206d9fccb062)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg235%26%2346%3Bimageshack%26%2346%3Bus%2Fimg235%2F9501%2F1001177xo9%26%2346%3Bjpg&hash=54a806fe2b3b3d6a8acd0f00af7c10f5)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg205%26%2346%3Bimageshack%26%2346%3Bus%2Fimg205%2F9845%2F1001178am5%26%2346%3Bjpg&hash=4166df3fdfa017728189e04386e8045b)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg339%26%2346%3Bimageshack%26%2346%3Bus%2Fimg339%2F6443%2F1001179nm1%26%2346%3Bjpg&hash=16848eabd6f2aac1bdcbf98eca63ffb9)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg296%26%2346%3Bimageshack%26%2346%3Bus%2Fimg296%2F7324%2F1001180ms8%26%2346%3Bjpg&hash=3a10ffa304f75400c999147c2106eb4c)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg296%26%2346%3Bimageshack%26%2346%3Bus%2Fimg296%2F521%2F1001181hl7%26%2346%3Bjpg&hash=5d145d1c12cb8666d47bc45a492c8ed7)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg174%26%2346%3Bimageshack%26%2346%3Bus%2Fimg174%2F2597%2F1001182qt5%26%2346%3Bjpg&hash=9a56e8ce7c176f533c3f0f064d51b053)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg518%26%2346%3Bimageshack%26%2346%3Bus%2Fimg518%2F3302%2F1001183jj4%26%2346%3Bjpg&hash=0cd51c190997d603464680f069c77eeb)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg124%26%2346%3Bimageshack%26%2346%3Bus%2Fimg124%2F7306%2F1001184ek4%26%2346%3Bjpg&hash=624c0552fe27fca8b6e9375607fc6858)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg339%26%2346%3Bimageshack%26%2346%3Bus%2Fimg339%2F8995%2F1001185mq0%26%2346%3Bjpg&hash=3d6fef96aef6dbff91fb18280735d8e5)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F1387%2F1001186dp3%26%2346%3Bjpg&hash=8b5e5d2c4d4fe04d0c04f4d103f1c866)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg235%26%2346%3Bimageshack%26%2346%3Bus%2Fimg235%2F8896%2F1001171pi3%26%2346%3Bjpg&hash=f999f52e1f3b3249bf15a2260a4d1c4c)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg296%26%2346%3Bimageshack%26%2346%3Bus%2Fimg296%2F12%2F1001187hi1%26%2346%3Bjpg&hash=c57362b53f3dd95b6cf8ec5380b5bce8)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg375%26%2346%3Bimageshack%26%2346%3Bus%2Fimg375%2F6711%2F1001200mm7%26%2346%3Bjpg&hash=05d2c3814fc012a144565400a0503244)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg75%26%2346%3Bimageshack%26%2346%3Bus%2Fimg75%2F4553%2F1001199bi2%26%2346%3Bjpg&hash=f60a718c4410fa955138ab8b8daef1d3)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg379%26%2346%3Bimageshack%26%2346%3Bus%2Fimg379%2F5101%2F1001198va3%26%2346%3Bjpg&hash=323c7a41fb89873bb69d24fe4ca110c8)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg93%26%2346%3Bimageshack%26%2346%3Bus%2Fimg93%2F7357%2F1001201hr3%26%2346%3Bjpg&hash=db9b5571a2f1ba286518a033498c9353)

okies....

I had a fight with the rear tranny mount... but I finally got it in.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg516%26%2346%3Bimageshack%26%2346%3Bus%2Fimg516%2F5486%2F1001354ix6%26%2346%3Bjpg&hash=466d7dc15ac8d93b4aa09f16e34cbb27)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg183%26%2346%3Bimageshack%26%2346%3Bus%2Fimg183%2F8860%2F1001353vx8%26%2346%3Bjpg&hash=ff18d440bb7023f69b199682ad017a42)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg178%26%2346%3Bimageshack%26%2346%3Bus%2Fimg178%2F2262%2F1001352cw1%26%2346%3Bjpg&hash=06bea26e7cafa78a2274804f133adc80)

I tried something with the rad supports... IDK if I like it or if I'm going to use it though....

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg112%26%2346%3Bimageshack%26%2346%3Bus%2Fimg112%2F5194%2F1001355ol2%26%2346%3Bjpg&hash=8978042f3ab36029e802669ecf80dd44)

Just an idea I have.... this is my junk dash btw

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F1590%2F10015666975794kf6%26%2346%3Bjpg&hash=673308ec929d037a33cb6f14329db589)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F4485%2F10015677267423ei1%26%2346%3Bjpg&hash=20532adc0f87156e15148170889b5347)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg72%26%2346%3Bimageshack%26%2346%3Bus%2Fimg72%2F3826%2F10015657340529jw4%26%2346%3Bjpg&hash=5e065186bb969bd1b791c2e21ca7e50b)

almost finished messing around with the TB...  

In order to get the mustang TB to work with the ZX2 acelerator cable and bracket I had to make a few modifications to the TB.

First I cut the front tab off the ZX2 bracket and positioned it in the same area on the mustang one.

Next I mixed up some 2 part Epoxy Putty and used it to attach the cut tab to the mustang TB.  After it hardened for a day I used some JB weld to make sure it got in all the nooks and crannies.

I then took a standard nut and attached it to the Mustang TB so that I could screw in the upper portion of the accelerator cable bracket to the TB and used a ton of Epoxy Putty to hold that on......

Let it set for a couple days and here is the result.  It still needs to be sanded smooth and painted to match the rest of the TB.

You will also notice that the blue plastic piece that holds the accel cable is from a ZX2.  I had to do that due to the different orientation of the ZX2 TB.

Oh, and before you ask.... I've tested the strength of the bond!!!  I think I'll bend the bracket before it ever breaks.

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg296%26%2346%3Bimageshack%26%2346%3Bus%2Fimg296%2F9382%2F10016828115404fc9%26%2346%3Bjpg&hash=05ff7d8d3b17bc0856e35ac32dea4f00)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg360%26%2346%3Bimageshack%26%2346%3Bus%2Fimg360%2F9430%2F10016818099511sy9%26%2346%3Bjpg&hash=93450f13285f0b6f57bce93f80ed6a2b)

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg363%26%2346%3Bimageshack%26%2346%3Bus%2Fimg363%2F8100%2F10016808084795du0%26%2346%3Bjpg&hash=f0248af1ce96dbd554338cfc93fad382)


I've done some more work lately but just haven't taken pictures of it as of yet..... I will soon though.

***HINT***
This car will not be running A-Arms or axles from a ZX2
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZX2fst on March 26, 2009, 01:29:12 PM
Motor is coming along pretty well, do you have to use a different radiator, or does the stock one fit with that header? Can't wait to see what your doing with the A-arms and axles. Motor looks really good.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on March 26, 2009, 01:39:22 PM
Quote from: "ZX2fst"
Motor is coming along pretty well, do you have to use a different radiator, or does the stock one fit with that header? Can't wait to see what your doing with the A-arms and axles. Motor looks really good.

The turbo manifold was designed to work with the stock radiator.

I used to have a 2 core fluidyne (civic) that I used, but I found it to run a little hot.  It never overheated, but I was uncomfortable with the temps.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: krux303 on March 26, 2009, 03:15:10 PM
Yay for my favorite zx2 build. D you da man. Btw can I haz your motorz?
Title: Re: ZZZX2's turbo/car rebuild.
Post by: Ironmark on March 26, 2009, 09:35:30 PM
looking good!
Title: Re: ZZZX2's turbo/car rebuild.
Post by: KoiHoshi on March 29, 2009, 12:40:51 PM
I can't wait to see this thing on a dyno!
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on March 29, 2009, 04:33:23 PM
I will not be pushing it right away....

nor will I ever go over 300 with stock gears
Title: Re: ZZZX2's turbo/car rebuild.
Post by: Ironmark on March 29, 2009, 09:14:46 PM
BOOM!

what the heck was that ZZZX2 breaking the sound barrier? nope just his tranny. :D
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on March 30, 2009, 09:48:54 AM
Quote from: "Ironmark"
BOOM!

what the heck was that ZZZX2 breaking the sound barrier? nope just his tranny. :D


Tr00f....  The G5m-r has held up on more than one occasion @ 300 with a LSD and stock gears.  Hence never going over 300...... unless of course I drop another poop load and buy custom made gears.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: krux303 on March 31, 2009, 06:20:41 AM
Have you found anybody that will make custom gears and how much?
Title: Re: ZZZX2's turbo/car rebuild.
Post by: mellowness65 on March 31, 2009, 07:31:56 AM
after the lsd buy is done i wouldnt be surprised if mfactory did a set
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on March 31, 2009, 01:24:28 PM
That would be really nice if they did!!

I've heard rumors that a company in Australia makes them..... but have yet to find it.... the rumored cost is over 4k also.... soooooo......
Title: Re: ZZZX2's turbo/car rebuild.
Post by: mellowness65 on March 31, 2009, 02:07:18 PM
http://www.par-engineering.com/index.htm (http://www.par-engineering.com/index.htm)

that's them I think
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on May 21, 2009, 05:47:31 PM
Quote from: "mellowness65"
http://www.par-engineering.com/index.htm

that's them I think

You are correct sir!!!

Oh btw.... the non zx2 a arms are almost finished.... should be on by the weekend.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: mellowness65 on May 21, 2009, 09:40:53 PM
all ya had to do was ask;)
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on May 23, 2009, 04:56:58 PM
Well, decided to start up work on the ZX2 again today.

Here is what was done.....  Can anyone guess what's different?

(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg36%26%2346%3Bimageshack%26%2346%3Bus%2Fimg36%2F3158%2F1001808%26%2346%3Bjpg&hash=4fff27f88420d2a07f46485fd6529f80)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg42%26%2346%3Bimageshack%26%2346%3Bus%2Fimg42%2F2299%2F1001811%26%2346%3Bjpg&hash=177e22980521fb4162d76e3afa4bc9cf)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg38%26%2346%3Bimageshack%26%2346%3Bus%2Fimg38%2F9490%2F1001809%26%2346%3Bjpg&hash=262088a4348f3e1b2f18c82d9e11f0e9)
(https://zx2ms.com/proxy.php?request=http%3A%2F%2Fhttp%26%2358%3B%2F%2Fimg34%26%2346%3Bimageshack%26%2346%3Bus%2Fimg34%2F2988%2F1001810%26%2346%3Bjpg&hash=0d1c7d6835bbaf955a7d3d6d1008ff44)
Title: Re: ZZZX2's turbo/car rebuild.
Post by: krux303 on May 24, 2009, 02:55:14 PM
Getter done D. She is looking and coming along great.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: mellowness65 on May 25, 2009, 10:50:52 PM
umm the axles don't look new anymore?


jk, what made you want to use the mx3 stuff? the wider stance?
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on June 30, 2009, 02:28:49 AM
Just a quick update.

The car is basically done (just need to finish the exhaust)

Here is a vid of one of my first start ups.

http://img531.imageshack.us/my.php?imag ... 358cj3.flv (http://img531.imageshack.us/my.php?image=10018637380358cj3.flv)

There is still tuning to do to make it road worthy, and the outside and interior is a long way off but I thought I'd share since I'm happy I didn't blow it up.

Road test #1 coming shortly.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: krux303 on June 30, 2009, 12:14:30 PM
I love this car. This is going to be one of the nicest zx2's out there. Way to go man.
Title: Re: ZZZX2's turbo/car rebuild.
Post by: GrndLvls Brain on July 01, 2009, 08:55:27 PM
Nice build up. The motor looks beautiful with that shade of blue and all. Really like the color of the vavle cover. Overall cars looking really good
Title: Re: ZZZX2's turbo/car rebuild.
Post by: ZZZX2 on August 02, 2009, 09:45:34 PM
Quick update for you all.

I have had the car running for a few weeks but have suffered a minor/major setback.

I managed to dump a couple liters of oil into the exhaust and the lower charge pipes and cooler.....  I'll be having to get myself a new seal for the turbo as it looks like this one has gone kablooie.

I may get it going again quick or may take this opportunity to see the glass half full and install the MFactory lsd and return to a ZX2 front suspension instead of the mx3.

If I decide to go this route I'll more than likely do a wire tuck, might redo the charge pipes and maf.... IDK as of yet....
Title: Re: ZZZX2's turbo/car rebuild.
Post by: mellowness65 on August 02, 2009, 10:22:02 PM
as i said on aim, run it the rest of the good weather season, that's like what 1-2 months? have fun with it, it's been down a year or so, have fun w/ it. then when your area turns to an ice block worry about the tranny and such
Title: Re: ZZZX2's turbo/car rebuild.
Post by: zonker on August 05, 2009, 09:54:56 PM
looking good... def looks like you're using all the right stuff there. all you need now to finish dressing up that valve cover is that polished billet spark plug cover i sell that says "turbocharged" on it (hint hint)